TM 9-2350-247-34
INSTALL TURN SIGNAL KIT — Continued
0076 00
51. Thread circuit 22-461 (17), 23 (18), and 24 (19) leads of main wiring harness (14); circuit 22-460 lead (20) of front
wiring harness (6); and circuit 21 lead (15) of rear wiring harness (8) through two retainers (11) and bushing (12).
52. Place new bushing (12) and two new retainers (11) in hull. Secure with screw (9) and nut (10).
53. Install three markers (21) on wiring harness (22) to indicate circuit 22-461 leads. Connect harness to circuit 22-461 (17)
lead of main wiring harness (14).
54. Connect retained wiring harness (23) to circuit 21 lead (24) of rear wiring harness (8). Connect retained wiring harness
(25) to circuit 24 leads (19) of main wiring harness (14).
0076 00-20
