TM 9-2350-247-34
REPLACE BURNER PACKING AND GASKET — Continued
0070 00
INSTALLATION
1.
Install new packing (9) and new gasket (10) in groove of burner (4).
2.
Place burner (4) in heater (8). Secure with four nuts (5), bolts (6), and clamps (7).
3.
Install ground strap (3) on burner (4). Secure with screw (1) and washer (2).
FOLLOW-THROUGH STEPS
1.
Install fixed resistor on heater (WP 0069 00).
2.
Install fuel control valve on heater (WP 0065 00).
3.
Install engine coolant heater in carrier (see your -20).
END OF TASK
0070 00-2
