TM 9-2350-247-34
INSTALL CARGO COVER/INSULATION KIT (SECONDARY KIT) — Continued
0059 00
23. Position cargo cover (1) on bows with escape hatch (2) at right rear. Make certain front pocket is properly fitted on
material handling kit beam. A helper(s) assistance is required to install cargo cover.
24. Secure cover (1) to four intermediate bows with nine attached rope ties.
25. Engage three front straps on cover (1), and press fastener tape together to secure front cover flaps in closed position.
26. Install front tie-down rope on cover (1), engage rope with tie-down cleats on power plant compartment bulkhead, tighten
rope until front flaps are correctly positioned, and tie rope ends securely. Stow free ends of rope by pulling between
secured portion of rope and bulkhead.
0059 00-8
