TM 9-2350-247-34
INSTALL CARGO COVER/INSULATION KIT (SECONDARY KIT) — Continued
0059 00
INSTALLATION
NOTE
Dispose of discarded parts in accordance with current directives.
1.
Remove eight floor plate screws (1) and spacer washers (2). Store screws and spacers with cover.
2.
Position floor plates (3) in lower position (see your -10).
3.
Clean inner face of cargo door (4) which is to be covered with insulation.
4.
Remove paint from top of edge of hull between four rear cargo cover bows (5) on each side. Clean surface where paint
was removed.
0059 00-2
