TM 9-2350-247-34
INSTALL CARGO AREA HEATER KIT Continued
0058 00
26. Install two clamps (1) on wiring harness (2) and two clamps (3) on hose assembly (4) to two harness and hose clips (5)
with two clip screws (6), washers (7), and nuts (8).
27. Install left rear harness clamp (9) on wiring harness (10). Install left rear hose clamp (11) on hose assembly (12) and
secure to clip (5) with screw (13), washer (14), and nut (15).
28. Install caution sign (16) on inside of cargo door. Place sign 3/4 inch (1.9 cm) from top of door, and 8-1/2 inches (21.6
cm) to left of door centerline.
29. Install cargo cover heat shield (WP 0060 00).
FOLLOW-THROUGH STEPS
1.
Install batteries (see your -20).
2.
Start and operate heater on both high and low heat (see your -10). Check heater for proper operation and inspect for fuel
leaks. If leaks are found, tighten connections. Turn heater off.
3.
Install top left access grille (see your -10).
END OF TASK
0058 00-11/12 blank