TM 9-2350-247-34
INSTALL CARGO AREA HEATER KIT — Continued
0058 00
12. Install two fuel tube clamps (1) on fuel tube assembly (2) and two front harness clamps (3) on cargo area wiring
harness (4). Install clamps together in pairs with two double clamp screws (5) and nuts (6).
13. Remove existing fuel tube clamp screw (7) and lock washer (8) securing existing cab heater harness clamp (9) on hull to
left of air separator tank. Insert cargo area wiring harness (4) in clamp (9), and reinstall lock washer (8) and screw (7).
14. Remove two screws (10) and lock washers (11) securing two clamps (12) to bottom of battery compartment. Insert
harness (4) in two clamps (12), and reinstall two new lock washers (11) and screws (10).
15. Install fuel bulkhead elbow (13) in opening in bulkhead between cargo area and power plant compartment with bulkhead
elbow lock nut (14).
16. Connect front fuel hose assembly (15) to bulkhead elbow (13) and fuel pump outlet elbow (16).
0058 00-7
