TM 9-2350-247-34
REPAIR WINCH TRANSFER GEARCASE (M548A1) — Continued
0044 00
ASSEMBLY
WARNING
Oil can splash back and burn you. Always wear full eye protection.
1.
Heat housing (1) in oil to 225-250
F, and install bearing (2) and bearing (3) in housing.
2.
Apply light coat of sealing compound to outer circumference of new oil seal (4) and new oil seal (5).
3.
Press oil seal (4) and oil seal (5) in housing (1) with lip of each seal facing away from housing.
4.
Heat cover (6) in oil to 225-250
F, and press bearing (7) and bearing (8) in housing.
5.
Apply light coat of sealing compound to outer circumference of new oil seal (9).
6.
Press oil seal (9) in cover (6) with lip of seal facing away from housing.
0044 00-6
