TM 9-2350-247-34
REPAIR WINCH TRANSFER GEARCASE (M548A1) — Continued
0044 00
9.
Remove turning screw (14) from output gear (13).
10. Remove oil seal (15) from cover (10). Discard seal.
11. Press bearing (16) from cover (10).
12. Remove bearing (17) from cover (10). Use puller.
13. Remove oil seal (18) and oil seal (19) from gearcase housing (7). Discard seals.
14. Press two bearing (20) and bearing (21) from gearcase housing (7).
CLEANING
1.
Clean all parts shown in figure below. See and TM 9-214 for cleaning instructions.
0044 00-3
