TM 9-2350-247-34
REPAIR WINCH GEARCASE ASSEMBLY (M548A1) Continued
0043 00
4.
Install endframe housing (8) on drum shaft (6) and tie rod (1). Make sure drum shaft is aligned with keyway of sliding
clutch (9). Check drum for freedom of movement.
5.
Install new lock nut (10) on end of tie rod (1) and tighten lock nut (10) and lock nut (11) against endframe housing (8).
FOLLOW-THROUGH STEPS
1.
Fill endframe and gearcase with oil (see your -20).
2.
Install winch on carrier (see your -20).
3.
Install winch cable (see your -20).
4.
Adjust winch (see your -20).
END OF TASK
0043 00-12