TM 9-2350-247-34
REPLACE INSTRUMENT PANEL WIRING HARNESS (M548A3) — Continued
0021 00
6.
Disconnect seven circuit leads 75A (4), 15 (5), 75 (6), 40 (7), 27-38 (8), 25 (9), and 28 (10) from circuit leads on main
wiring harness (11).
7.
Remove three screws (12), lock washers (13) and clamps (14) from wiring harness (15) and bulkhead. Discard lock
washers.
8.
Remove two screws (16), lock washers (17), and clamps (18) from wiring harness (15) and battery compartment floor.
Discard lock washers.
9.
Remove grommet (19) securing wiring harness (15) to bulkhead. Discard grommet.
10. Pull wiring harness (15) into cab and remove from carrier.
0021 00-4
