TM 9-2350-247-34
REPLACE POWER WIRING HARNESS (M548A1) — Continued
0020 00
9.
Install power wiring harness (1), two clamps (2), new lock washers (3), and screws (4) to battery compartment floor.
10. Install bulkhead cover (5) and four screws (6) on battery compartment bulkhead.
11. Install new grommet (7) on bulkhead cover (5).
NOTE
Do Step 12 only if air brake is installed.
12. Connect circuit 1B lead (8) to air low pressure switch (9), and circuit 75 lead (10) and circuit 75A lead (11) to stoplight
switch (12) on treadle valve assembly.
0020 00-10
