TM 9-2350-247-34
REPLACE POWER WIRING HARNESS (M548A1) Continued
0020 00
INSTALLATION
1.
Position power wiring harness (24) in carrier and thread bus bar end of harness through bulkhead cover (25) and opening
for bulkhead cover into battery compartment under battery frame.
2.
Install receptacle (23), four screws (22), and nuts (21) on bulkhead.
3.
Install five leads (20), screw (19), and new lock nut (18) on bus bar (17).
4.
Install four leads (16), screw (15), and new lock nut (14) on bus bar (17).
0020 00-8