REPLACE NBC WIRING HARNESS FROM BATTERY COMPARTMENT TO MANIFOLD (M548A3) Continued

REPLACE NBC WIRING HARNESS FROM BATTERY COMPARTMENT TO MANIFOLD (M548A3)

REPLACE NBC WIRING HARNESS FROM BATTERY COMPARTMENT TO MANIFOLD (M548A3) Continued - TM-9-2350-247-20-3_677

TM-9-2350-247-20-3 Carrier Cargo Tracked 6 Ton M548A12350010969356 (EIC: AEU) M548A3 2350013696081 (EIC: AE9) Manual
Page Navigation
576

TM 9-2350-247-20-3 REPLACE NBC WIRING HARNESS FROM BATTERY COMPARTMENT TO MANIFOLD (M548A3) — Continued 0531 00 REMOVAL NOTE Mark all parts for easy identification before removing. 1. Disconnect circuit 400D lead (1) from lead (2) on vehicle compartment heater control box (3). 2. Disconnect circuit 400C lead (4) from circuit 400 lead (5). 3. Disconnect circuit 400A lead (6) from circuit 400 lead (7) on coolant heater control box (8), if installed. 4. Disconnect NBC wiring harness (9) at connector (10) to M3 heater harness connector (11). 5. Remove three clamps (12), screws (13), and lock washers (14) securing NBC wiring harness (9) and existing harness to weld nuts behind instrument panel (15). Discard lock washers. 6. Remove NBC wiring harness (9) with grommets (16) from stiffener (17) and stiffener (18). 0531 00-2

Privacy Statement
Press Release
Contact