TM 9-2350-247-20-3
REPLACE POWER PLANT RIGHT REAR ACCESS COVER SEAL — Continued
0389 00
INSTALLATION
1.
Clean mating surfaces of right rear access cover (2) and seal (1) with cleaning compound.
2.
Put a thin coat of adhesive on mating surfaces of right rear access cover (2) and seal (1). Allow to dry until tacky.
3.
Press seal (1) on right rear access cover (2) firmly.
FOLLOW-THROUGH STEPS
1.
Install power plant right rear access cover (see your -10).
END OF TASK
0389 00-2
