TM 9-2350-247-20-3
REPLACE FLASHER — Continued
0509 00
INSTALLATION
1.
Place new gasket (9) and bar (6) on inside of carrier. Secure with two screws (7) and new lock washers (8) from outside
of carrier.
2.
Place flasher (2) on bar (6). Secure with ground lead (5), three new lock washers (4), and two screws (3). Install one
washer on each side of ground lead terminal.
3.
Connect harness lead (1) to flasher (2).
FOLLOW-THROUGH STEPS
1.
Check flasher for proper operation.
END OF TASK
0509 00-2
