TM 9-2350-247-20-3
REPLACE BLACKOUT STOPLIGHT-TAILLIGHT Continued
0507 00
INSTALLATION
1.
Place bracket (5) in hull opening. Insert blackout stoplight-taillight (1) in bracket. Secure with two new lock washers
(7), stud (8), and nut (6). Install one washer on each side of bracket. Make sure 1-1/2 threads extend through nut.
2.
Place bracket (5) in hull opening. Secure with six screws (4), two new lock washers (3), and six nuts (2).
3.
Place fuel compartment vent hose over bracket (5). Connect circuit 23 lead to blackout stoplight-taillight (1).
FOLLOW-THROUGH STEPS
1.
Check blackout stoplight-taillight for proper operation (see your -10).
END OF TASK
0507 00-2