TM 9-2350-247-20-3
REPLACE TRANSVERSE BEAM AND CENTER SEAT PANEL (M548A1) Continued
0384 00
REMOVAL
1.
Remove screw (1), two washers (2), and lock nut (3) that secure panel beam (4) to transverse beam (5). Discard lock nut.
2.
Loosen screw (6) at rear end of panel beam (4). Swing panel beam to rear.
3.
Remove three screws (7), six washers (8), and three lock nuts (9) that secure right end of transverse beam (5) to right seat
section. Discard lock nuts.
4.
Remove two screws (10), four washers (11), and two lock nuts (12) that secure transverse beam (5) to carrier. Discard
lock nuts.
0384 00-2