TM 9-2350-247-20-3
REPLACE CARGO AREA HEATER WIRING HARNESS Continued
0465 00
10. Install new grommet (1) on front wiring harness (2) and in bulkhead.
11. Secure front wiring harness (2) to battery box and bulkhead with seven clamps (3), five screws (4), and new lock nuts (5).
12. Secure front wiring harness ground lead (6) to fuel pump (7) with new lock washer (8) and screw (9).
13. Connect circuit 402C lead (10) to capacitor (11) on fuel pump (7).
NOTE
The second circuit 400C is for the vehicle compartment heater, if installed.
14. Secure front wiring harness circuit 400C lead (12) with circuit 400C and circuit 6 to master switch (13) in battery box
with nut (14).
FOLLOW-THROUGH STEPS
1.
Connect battery negative lead(s) (WP 0292 00).
2.
Start cargo area heater (see your -10).
3.
Check cargo area heater for proper operation.
4.
Stop cargo area heater (see your -10).
5.
Install top left access grille (WP 0390 00).
END OF TASK
0465 00-7/8 blank