REPLACE CARGO AREA HEATER WIRING HARNESS Continued

REPLACE CARGO AREA HEATER WIRING HARNESS Continued - TM-9-2350-247-20-3_410

REPLACE CARGO AREA HEATER WIRING HARNESS Continued - TM-9-2350-247-20-3_412

TM-9-2350-247-20-3 Carrier Cargo Tracked 6 Ton M548A12350010969356 (EIC: AEU) M548A3 2350013696081 (EIC: AE9) Manual
Page Navigation
339

TM 9-2350-247-20-3 REPLACE CARGO AREA HEATER WIRING HARNESS — Continued 0465 00 6. Remove lock nut (1), screw (2), and two clamps (3) securing front wiring harness (4) to clip (5). Discard lock nut. 7. Disconnect front wiring harness (4) from rear wiring harness (6). 8. Remove front wiring harness (4) from carrier through guard (7). 9. Disconnect rear wiring harness connector (8) from heater (9). 10. Disconnect rear wiring harness connector (10) and circuit 400C lead (11) from control box (12). 11. Remove screw (13), two lock washers (14), and rear wiring harness ground lead (15) from control box (12). Discard lock washers. 12. Remove two lock nuts (16), washers (17), screws (18), four clamps (19), and rear wiring harness (6) from two clips (5). Discard lock nuts. 0465 00-3

Privacy Statement
Press Release
Contact