TM 9-2350-247-20-3
REPLACE FIBERGLASS CAB COVER — Continued
0456 00
REMOVAL
1.
Remove 8 screws (1), spacers (2), grommets (3), lock nuts (4), and 16 washers (5) that secure fiberglass cab cover (6),
front seal (7), and 2 pads (8) to windshield frame (9). Discard lock nuts.
2.
Remove 8 screws (10), 7 spacers (11), and large spacer (12). Remove 8 grommets (13), lock nuts (14), and 16 washers
(15) that secure fiberglass cab cover (6), rear seal (16) and 2 side seals (17) to transverse beam (18). Discard lock nuts.
NOTE
Lifting fiberglass cab cover on or off carrier is a two-person job.
3.
Remove fiberglass cab cover (6), front seal (7), rear seal (16), and two side seals (17) from carrier. Have helper assist.
Check seals for cracks and wear. Replace seals if necessary.
INSTALLATION
1.
Place rear seal (16) and two side seals (17) on transverse beam (18). Place front seal (7) and two pads (8) on windshield
frame (9).
2.
Place fiberglass cab cover (6) on carrier.
3.
Secure front seal (7), 2 pads (8), and fiberglass cab cover (6) on windshield frame (9) with 8 spacers (2), grommets (3),
screws (1), new lock nuts (4), and 16 washers (5).
4.
Secure rear seal (16), 2 side seals (17), and fiberglass cab cover (6) on transverse beam (18) with 7 spacers (11), large
spacer (12), 8 grommets (13), 16 washers (15), 8 screws (10), and new lock nuts (14).
END OF TASK
0456 00-2
