TM 9-2350-247-20-3
REPLACE VEHICLE COMPARTMENT HEATER EXHAUST GUARD (M548A1)
Continued
0455 00
6.
Remove six screws (6), washers (10), and three guard brackets (11).
NOTE
Mark upper exhaust pipe (2) 5 1/2 inch and 25 inch (13.97 cm and 63.5 cm) from bottom to
indicate position of bracket clamps (13, 16).
7.
Remove U-bolt (12) from bracket clamp (13) by removing two lock nuts (14) and washers (15). Discard lock nuts.
8.
Disassemble two bracket clamps (16) by removing two screws (17), lock nuts (18), and four washers (19). Discard lock
nuts.
0455 00-3