TM 9-2350-247-20-3
REPLACE VEHICLE COMPARTMENT HEATER AIR INLET DUCTS (M548A3) — Continued
0438 00
INSTALLATION
1.
Slide tube (1) through top plate and align with air inlet duct (2) opening. Have helper assist.
2.
Place clamp (3) on air inlet duct (2) and install duct on tube (1) and heater (4). Tighten clamp.
3.
Install two new lock washers (5), washers (6), and screws (7) on air inlet duct (2) and tube (1).
4.
Install new seal (8), flange (9), and cover (10) on tube (1).
5.
Secure cover (10) on tube (1) and top plate with two new lock washers (11), washers (12), and screws (13).
FOLLOW-THROUGH STEPS
1.
Install front access cover (WP 0391 00).
2.
Install left front lifting eye (WP 0382 00) or machine gun mount (WP 0513 00), (WP 0514 00) or (WP 0515 00), if
removed.
END OF TASK
0438 00-3/4 blank
