TM 9-2350-247-20-3
REPLACE VEHICLE COMPARTMENT HEATER AIR INLET DUCTS (M548A3) — Continued
0438 00
REMOVAL
NOTE
Heater air inlet duct will be behind left front lifting eye or machine gun mount, if installed.
1.
Remove two screws (1), washers (2), and lock washers (3) from air inlet duct (4). Discard lock washers.
2.
Loosen clamp (5) and remove air inlet duct (4) from heater (6) and tube (7).
3.
Remove two screws (8), washers (9), and lock washers (10) from cover (11). Discard lock washers.
4.
Remove cover (11), flange (12), seal (13), and tube (7) from carrier. Discard seal.
0438 00-2
