REPLACE VEHICLE COMPARTMENT HEATER EXHAUST METAL HOSE ASSEMBLY (M548A3) Continued

REPLACE VEHICLE COMPARTMENT HEATER EXHAUST METAL HOSE ASSEMBLY (M548A3) Continued - TM-9-2350-247-20-3_279

REPLACE VEHICLE COMPARTMENT HEATER AIR INLET DUCTS (M548A3)

TM-9-2350-247-20-3 Carrier Cargo Tracked 6 Ton M548A12350010969356 (EIC: AEU) M548A3 2350013696081 (EIC: AE9) Manual
Page Navigation
223

TM 9-2350-247-20-3 REPLACE VEHICLE COMPARTMENT HEATER EXHAUST METAL HOSE ASSEMBLY (M548A3) — Continued 0437 00 9. Secure two clamps (3) and metal hose assembly (2) on two hull weld nuts with two washers (12), new lock washers (13), and screws (14). 10. Install metal hose assembly (15) and clamp (16) on metal hose assembly (2). Tighten clamp. 11. Install end of metal hose assembly (15) through bulkhead. Secure with two washers (17), new lock washers (18), and screws (19). Have helper assist. FOLLOW-THROUGH STEPS 1. Lower center seat (see your -10). 2. Install top right access grille (see your -10). 3. Install right floor plate (WP 0395 00). 4. Install front access cover (WP 0391 00). 5. Connect both battery negative leads (WP 0292 00). END OF TASK 0437 00-6

Privacy Statement
Press Release
Contact