REPLACE BILGE PUMP DISCHARGE TUBES AND HOSES (M548A1) Continued

REPLACE BILGE PUMP DISCHARGE TUBES AND HOSES (M548A1)

REPLACE BILGE PUMP DISCHARGE TUBES AND HOSES (M548A3)

TM-9-2350-247-20-3 Carrier Cargo Tracked 6 Ton M548A12350010969356 (EIC: AEU) M548A3 2350013696081 (EIC: AE9) Manual
Page Navigation
176

TM 9-2350-247-20-3 REPLACE BILGE PUMP DISCHARGE TUBES AND HOSES (M548A1) — Continued 0425 00 INSTALLATION 1. Install two hoses (6) on each end of tube (4). Connect hoses to tube (7) and bilge pump (8). Tighten four clamps (5). 2. Install two clamps (3) on tube (4) and secure to hull with two screws (1) and washers (2). FOLLOW-THROUGH STEPS 1. Lower cab center floor plates (WP 0394 00). 2. Install right seat (WP 0400 00). END OF TASK 0425 00-2

Privacy Statement
Press Release
Contact