TM 9-2350-247-20-3
REPLACE BILGE PUMP — Continued
0424 00
6.
Remove two screws (1) and lock washers (2) that secure screen (3) to bilge pump (4). Discard lock washers.
7.
Separate screen (3) from bilge pump (4).
8.
Remove screw (5) and two lock washers (6) that secure negative lead (7) to bilge pump (4). Remove negative lead.
Discard lock washers.
9.
Remove adapter (8) from bilge pump (4).
CLEANING
1.
Clean 1/8 inch (2 mm) air bleed hole (9).
2.
Clean the bottom of the hull. Remove all sludge, oil, dirt or other debris.
0424 00-3
