TM 9-2350-247-20-3
REPLACE BILGE PUMP Continued
0424 00
NOTE
One lock washer (6) is installed between strap (2) and hull weld nut (3), one between strap and
negative lead (7), and one between negative lead and screw (8).
4.
Place bilge pump (1) and cross strap (2) on hull (3). Secure cross strap to hull with new key washer (4), screw (5), three
new lock washers (6), negative lead (7), and screw (8).
5.
Bend tabs of key washer (4) to secure screw (5).
6.
Place end strap (9) on bilge pump (1) and two hull weld nuts (3). Secure strap with two new key washers (10) and
screws (11).
0424 00-5