REPLACE WINDSHIELD WIPER LINKAGE Continued

REPLACE WINDSHIELD WIPER LINKAGE Continued - TM-9-2350-247-20-3_211

TM-9-2350-247-20-3 Carrier Cargo Tracked 6 Ton M548A12350010969356 (EIC: AEU) M548A3 2350013696081 (EIC: AE9) Manual
Page Navigation
164

TM 9-2350-247-20-3 REPLACE WINDSHIELD WIPER LINKAGE — Continued 0421 00 CAUTION Install links with flat side toward pivot. Linkage could be damaged during operation if open side of link is toward pivot. 4. Place link (11) on pivot (9) and pivot (10). 5. Place spacer (12) on pivot (1). Place link (13) on pivot (1) and over link (11) on pivot (10). Install two washers (14) and clips (15) on link (13). 6. Place link (16) on motor (17) and pivot (9). Install two washers (14) and clips (15) on link. FOLLOW-THROUGH STEPS 1. Connect battery ground lead(s) (WP 0292 00). 2. Check operation of windshield wiper linkage. END OF TASK 0421 00-4

Privacy Statement
Press Release
Contact