TM 9-2350-247-20-3
REPLACE WINDSHIELD WIPER LINKAGE Continued
0421 00
REMOVAL
1.
Remove two clips (1) and washers (2) from link (3). Pull link from motor (4) and pivot (5).
2.
Remove two clips (1) and washers (2) from link (6). Pull link from pivot (7) and pivot (8). Remove spacer (9) from
pivot (8).
3.
Pull link (10) from pivot (5) and pivot (7).
4.
Remove nut (11), lock washer (12), and arm and blade assembly (13) from pivot (8). Remove tapered bushing (14) from
pivot. Remove arm and blade assemblies from pivot (5) and pivot (7) the same way.
5.
Remove nut (15) from pivot (8). Remove lock nut (16) and screw (17) from pivot (8). Pull pivot from carrier. Remove
pivot (5) and pivot (7) the same way. Discard lock nut.
0421 00-2