TM 9-2350-247-20-2
REPLACE REAR TIEDOWN PLATES
THIS WORK PACKAGE COVERS:
INITIAL SETUP:
Maintenance Level
Personnel Required
Unit
Unit Mechanic
Tools and Special Tools
References
General Mechanic's Tool Kit (WP 0541 00, Item 57)
See your -10
Socket Wrench Set (WP 0541 00, Item 65)
Torque Wrench (WP 0541 00, Item 72)
Equipment Condition
Materials/Parts
Engine stopped (see your -10)
Sealing compound primer (WP 0542 00, Item 40)
Carrier blocked (see your -10)
Sealing compound (WP 0542 00, Item 47)
REMOVAL
1.
Remove 12 screws (2) and two plates (1) from bottom of carrier.
INSTALLATION
1.
Install two plates (1) to bottom of carrier.
a.
Apply a light coat of sealing compound primer and sealing compound to the threads of the 12 screws (2).
b.
Install two plates (1) and coated screws (2) to bottom of carrier.
2.
Tighten 12 screws (2) to 268-295 lb-ft (363-400 Nm) torque. Use torque wrench and socket wrench set.
END OF TASK