TM 9-2350-247-20-2
ADJUST STEERING CONTROLS (M548A1) -- Continued
0367 00
f.
Place quadrant (1) and quadrant (2) and stops (3) on bracket (4). Push down on quadrants while tightening two
screws (5) and new lock nuts (6).
g.
Use a 5/32 in (4 mm) diameter rod, screw, or drill bit shank to check gap between steering lever pawls (7) and tops
of quadrant(1) and quadrant (2) while moving left steering lever (8) and right steering lever (9) from front to back.
0367 00-5
