TM 9-2350-247-20-2
REPLACE STEERING WHEEL LINKAGE (M548A3) -- Continued
0364 00
4.
Remove screw (1), washer (2), lock nut (3), and connecting link (4) with rod end bearing (5) from shaft lever (6).
Discard lock nut.
5.
Remove screw (7), washer (8), lock nut (9), and connecting link (10) from shaft lever (11). Discard lock nut.
6.
Remove four screws (12) and washers (13) from two bearings (14) and plate. Remove shaft (15) and bearings from
carrier.
7.
Remove two screws (16) from two spacers (17). Remove two lock nuts (18), washers (19), shaft lever (6), shaft
lever(11), keys(20), spacers, and bearings (14) from shaft (15). Discard lock nuts.
8.
Remove rod end bearing (21) and jam nut (22) from connecting link (10).
9.
Remove two screws (23), washers (24), lock nuts (25), and separate connecting link (10) from connecting link (26).
Discard lock nuts.
10. Remove screw (27), washer (28), and shaft lever (29) from transmission.
11. Remove screw (30), washer (31), lock nut (32), and connecting link (26) from lever (29). Discard lock nut.
0364 00-2