TM 9-2350-247-20-2
ADJUST STEERING WHEEL LINKAGE (M548A3) -- Continued
0362 00
ADJUSTMENT
1.
Remove four screws (1), washers (2), lock washers (3), and bracket (4) from hull. Discard lock washers.
2.
Remove locknut (5), washer (6), screw (7), and link (8) from lever (9). Discard locknut.
3.
Loosen nut (10) and unscrew bearing end (11) to a length of 32.5 inches (82.55 cm) from rod end bearing (12). Have
helper assist.
4.
Tighten nut (10) to hold bearing end (11) with rod end bearing (12).
5.
Secure lever (9) to link (8) with new locknut (5), washer (6), and screw (7).