TM 9-2350-247-20-2
REPLACE ROAD WHEEL SUPPORT ARM BUMPER STOP/SUPPORT -- Continued
0353 00
REMOVAL
1.
Remove two lock nuts (1), washers (2), and bumper (3) from bumper stop/support (4). Discard lock nuts.
2.
Remove screw (5), two screws (6), and bumper stop/support (4) from hull.
INSTALLATION
1.
Install bumper stop/support (4), two screws (6) and screw (5) on hull. Torque screws to 315-325 lb-ft (427-441 Nm)
2.
Place bumper (3) on bumper stop/support (4).
3.
Secure bumper (3) with two washers (2) and new lock nuts (1).
END OF TASK