TM 9-2350-247-20-2
REPLACE TRANSMISSION VENT TUBE, GAUGE ROD, AND FILLER NECK (M548A1) --
0304 00
Continued
INSTALLATION
1.
Install two elbows (1) in transmission and filler neck (2).
2.
Install filler neck (2) on transmission and tighten nut (3).
3.
Install two hoses (4), clamps (5), and bracket (6) on transmission with new tab washer (7) and screw (8).
4.
Install clamp (9) on bracket (6) with new lock nut (10) and screw (11).
5.
Connect vent tube (12) at two elbows (1).
6.
Insert cap and gauge rod (13) in filler neck (2) and turn right to secure.
FOLLOW-THROUGH STEPS
1.
Fill transmission (WP 0128 00).
2.
Lower center seat (see your -10).
3.
Install left grille (WP 0372 00).
4.
Install air cleaner (WP 0152 00).
5.
Connect battery negative lead (WP 0292 00).
6.
Install power plant lower rear access cover (see your -10).
END OF TASK
