TM 9-2350-247-20-2
REPLACE POWER PLANT WIRING HARNESS (M548A3) -- Continued
0298 00
19. Install two clamps (11), four washers (12), two screws (13), and new lock nuts (14) on brackets (15).
20. Install two new straps (16) on wiring harness (17).
21. Install clamp (18), two washers (19), screw (20), and new lock nut (21) on bracket (22) on transmission.
FOLLOW-THROUGH STEPS
1.
Install center floor plates (WP 0395 00).
2.
Install hull botton access cover (WP 0383 00).
3.
4.
Lower center seat (see your -10).
END OF TASK
0298 00-12