TM 9-2350-247-20-2
REPLACE GENERATOR DRIVE BELTS (M548A1) -- Continued
0240 00
INSTALLATION
NOTE
Generator drive belts must be installed only in matched sets.
1.
2.
Adjust generator belts (WP 0241 00).
3.
Tighten jam nut (1) against gauge nut (2) to lock in place.
FOLLOW-THROUGH STEPS
1.
Connect battery negative lead (WP 0292 00).
2.
Start engine (see your -10).
3.
Check generator belts for proper operation.
4.
Stop engine (see your -10).
5.
Install power plant rear access covers/door (see your -10).
END OF TASK
