TM 9-2350-247-20-2
REPLACE FUEL CUTOFF HAND CONTROL (M548A1) -- Continued
0194 00
INSTALLATION
1.
Insert fuel cutoff control cable (1) in instrument panel (2) through washer (3) and nut (4). Secure nut and washer to hold
control cable in place on instrument panel.
2.
Insert fuel cutoff control cable (1) through grommet (5) and adapter (6).
3.
Secure fuel cutoff control cable (1) to adapter (6) with clamp (7), two screws (8), and new lock nuts (9).
4.
Install adjustable strap (10) to secure fuel cutoff control cable (1).
5.
Install link pin (11) in engine stop lever (12). Secure with washer (13) and new cotter pin (14).
6.
Install fuel cutoff control cable (1) through retainer collars (15) and link pin (11). Secure control cable in collars with
two setscrews (16).
7.
Install nine clamps (17) on fuel cutoff control cable (1). Secure clamps to weld nuts (18) with nine new lock washers
(19) and screws (20).
8.