TM 9-2350-247-20-2
REPLACE FUEL COMPARTMENT EXPANSION TANK VENT TUBES, HOSES, AND
0174 00
FITTINGS -- Continued
INSTALLATION
NOTE
Put sealing compound on male threads. Do not put sealing compound beyond small end of
tapered threads.
1.
Install hose (1), adapter (2), nut (3), retaining ring (4), and new preformed packing (5) on fuel compartment.
2.
Install end of hose (1) on bottom of expansion tank tee (6). Tighten two clamps (7).
3.
Install adapter (8) on hose (9). Attach hose (9) to tube (10) with two clamps (11). Tighten clamps.
4.
Attach tube (12) to hose (13) and hose (14). Install hose (13) on tube (10). Tighten two clamps (15).
5.
Install clamp (16) to hull with screw (17) and new lock washer (18).
6.
Install connector (19) on hose (14). Push connector through hull. Install nut (20) on connector.
7.
Connect hose (21) to connector (19) and expansion tank tee (6).
8.
Tighten four clamps (22) on hose (21) and hose (14).