TM 9-2350-247-20-2
REPLACE AIR CLEANER FILTER INDICATOR ASSEMBLY (M548A1) -- Continued
0154 00
INSTALLATION
NOTE
Apply sealing compound on threads of male fittings before installation. Do not apply beyond
end of threads.
1.
Place gasket (5) and indicator (4) on bracket (6). Secure with two screws (3), four washers (2), and two new lock nuts (1).
2.
Install adapter (7) in indicator (4).
3.
Install nipple (8) and tee (9) in engine air inlet (10).
4.
Install adapter (11), bushing (12), and elbow (13) in tee (9).
5.
Install adapter (14) in tee (9).
6.
Install new grommet (15) in floor.
7.
Route hose (16) through grommet (15). Connect hose to adapter (11) and adapter (7).
8.
Secure hose (17) to wiring harness (18) and hose (16) with five new straps (19).
9.
Secure hose (17) to support with clamp (20), screw (21), washer (22), and new lock nut (23).
10. Secure hose (16) to weldnut (24) with clamp (25), new lock washer (26), and screw (27).