TM 9-2350-247-20-1
BLOCK POWER PLANT (M548A1) Continued
0132 00
2.
On level ground place two 4 x 6 x 18 inch (10 x 15 x 46 cm) blocks (1) under front of engine. Place blocks parallel to
each other with 6 inch (15 cm) side down. Blocks should be about 18 inches (46 cm) apart from outside edges.
3.
Stack two 4 x 6 x 18 inch (10 x 15 x 46 cm) blocks (2) on top of each other. Place blocks on top of blocks (1) at a 90
degree angle. Blocks will be about 10 1/2 inches (24 cm) high.
0132 00-2