TM 9-2350-247-20-1
REMOVE/INSTALL POWER PLANT (M548A3) — Continued
0131 00
33. Install two clamps (19) and air filter-to-turbo hose (20) on turbocharger outlet (21) and air cleaner outlet (22). Tighten
clamps.
FOLLOW-THROUGH STEPS
1.
Install hull bottom access cover (WP 0383 00).
2.
Install muffler (WP 0207 00).
3.
Install support from seat support and floor support (WP 0395 00).
4.
Install two center floor plates (WP 0395 00).
5.
Install transverse beam (WP 0385 00).
6.
Install personnel seat and seat support (WP 0395 00), (WP 0398 00).
7.
Unfold rear compartment cover forward or install rear compartment cover and bows (WP 0417 00).
8.
Install cab cover and frame (see your -10)
9.
Adjust throttle valve modulator (WP 0204 00).
10. Check engine and transmission fluid levels (see your PMCS).
11. Connect both battery negative leads (WP 0292 00)
12. Start engine (see your -10). Check for leaks.
13. Stop engine (see your -10).
14. Install power plant rear access panel (see your -10).
END OF TASK
0131 00-16
