ENGINE DOES NOT CRANK (M548A1)Continued

ENGINE DOES NOT CRANK (M548A1)Continued - TM-9-2350-247-20-1_109

TM-9-2350-247-20-1 Crane (CAB) Components Recovery Vehicle Full Tracked: light Armored M578 (2360-00-439-6242) (EIC:3LA) Manual
Page Navigation
63

TM 9-2350-247-20-1 ENGINE DOES NOT CRANK (M548A1)—Continued 0010 00 Y 1. Turn MASTER SWITCH OFF. 2. Remove engine harness plug (1) from front main harness jack (2) at carrier bulkhead. 3. Turn MASTER SWITCH ON. 4. (H) Press start switch and hold for test. 5. Measure voltage between front main harness jack (2), socket H (3), and ground. 6. Does multimeter read less than 17 volts? NO GO TO BY (PAGE 0010 00-3) 0010 00-2 YES DY

Privacy Statement
Press Release
Contact