TM 9-2350-247-10
MAINTENANCE OF CAB COVER AND WINDOWS — Continued
0072 00
2.
To install a windshield section, set it in the retaining strip and lock the studs or tighten the T-bolts to secure the
windshield section in place.
REMOVE/INSTALL CAB SIDE WINDOWS
CAUTION
To avoid the chance of being hurt by broken glass, remove all the cab side windows in a combat
area.
NOTE
Each cab side window is held to its cab door by two screws and flat washers. One screw and
washer are in the handle recess on the outside of the door, and the other screw and washer are
in a recess on the inside of the door, just above the upper hinge.
1.
To remove a side window, open the door and remove two screws and washers.
2.
Lift the window straight up until the window locating pins are clear of the door.
0072 00-4
