TM 9-2350-247-10
REMOVE/INSTALL TRACK SHOE — Continued
0060 00
3.
Remove nut from track pin of replacement track shoe. Use socket wrench handle and 11/16 inch socket wrench.
WARNING
Hammering on drive pin punch or track pin may deflect particles of metal or dirt in soldier’s
eyes. To prevent eye damage, protection (goggles) is necessary.
4.
Drive track pin part way out with short end of drive pin punch. Use hammer. Remove drive pin punch.
5.
Drive track pin all the way out with long end of drive pin punch. Use hammer. Remove drive pin punch.
6.
Coat track pin with oil or grease. Install nut flush on track pin. Use socket wrench handle and 11/16 inch socket wrench.
0060 00-4
