TM 9-2350-247-10
BREAK/JOIN TRACK — Continued
0059 00
WARNING
You could be injured if track swings out and hits you. Do not stand in front of track being
broken.
8.
Install two track fixtures across the pin to be removed. Tighten track fixtures to about a 20 degree angle between the
shoes to be disconnected. There should be about 2 inches (5 cm) between the fixtures and the track at the pin. Use
adjustable wrench.
9.
Remove track pin nut from track pin to be removed. Use socket wrench handle and 11/16 inch socket wrench.
0059 00-3
