INSPECT/ADJUST TRACKS Continued - TM-9-2350-247-10

INSPECT/ADJUST TRACKS Continued - TM-9-2350-247-10_467

INSPECT/ADJUST TRACKS Continued - TM-9-2350-247-10_469

TM-9-2350-247-10 Hull and Related Components Recovery Vehicle Full Tracked: Light Armored M578 (2360-00-439-6242) (EIC:3LA) Manual
Page Navigation
394

TM 9-2350-247-10 INSPECT/ADJUST TRACKS — Continued 0058 00 ADJUSTMENT CAUTION Dirt can damage fitting and cylinder. Clean all dirt from fitting on track tension adjuster. Servicing the fitting can damage the track adjuster, idler wheel and final drive bearings. Track adjuster fitting is not a true lubrication point. DO NOT service when lubricating the carrier. Track adjuster can be damaged during carrier operation. Do not extend adjuster beyond 17 inches (43 cm). 1. Tighten track tension using grease gun to add grease through fitting on track tension adjuster. If track adjuster is extended to its maximum limit of 17 inches and the track is still too loose, remove one track shoe (WP 0060 00). 0058 00-5

Privacy Statement
Press Release
Contact