OPERATING THE CONVEYOR (continued) - TM-9-2350-287-10

OPERATING THE CONVEYOR (continued) - TM-9-2350-287-10_194

OPERATING THE CONVEYOR (continued) - TM-9-2350-287-10_196

TM-9-2350-287-10 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
172

TM 9-2350-287-10 OPERATING THE CONVEYOR (continued) WARNING l Make sure footing is firm and deployment area is free of obstructions. When deploying conveyor, be prepared to stand to one side and move quickly after conveyor begins to move; it moves rapidly. l Keep fingers clear of section hinges when deploying conveyor. l Keep hands away from drive section handles until handles are clear of support struts. l Conveyor may swing left or right when being deployed. Be careful to avoid swinging. l Make sure door is positioned at 120 degrees from closed position. This will help control speed of deployment. 9. Open upper rear door (9) to take slack out of two slings (6) (p. 2-138). Raise upper rear door (9) slightly higher until conveyor (2) comes free from vehicle. 10. Have assistant pull on forward dead-end section (3) until conveyor (2) extends fully. 2-152 Change 1

Privacy Statement
Press Release
Contact