TM 9-2350-277-34
REPAIR AUXILIARY POWER UNIT COVER (M577A3 AND M1068A3 ONLY) Continued
0071 00
8.
Check eyelets, washers, and studs. Replace parts that are bent, broken, or missing.
REPAIR OR REPLACEMENT
NOTE
The materials used to make a cement patch are adhesive, round patch of vinyl coated nylon
cloth, roller, board, wire brush, and soft bristle brush.
1.
Select patch that overlaps damaged area with a margin of at least 3/4 inch (19 mm) on all sides.
2.
Place board under damaged area for a flat working surface.
3.
Buff patch and damaged area of fabric with wire brush.
0071 00-2