REPAIR AUXILIARY POWER UNIT COVER (M577A3 AND M1068A3 ONLY) Continued
Adhesive is flammable and can injure you. Keep it away from heat, sparks, and open flame.
Avoid repeated or prolonged breathing of vapors. Avoid contact with your skin.
Center patch over damaged area. Apply adhesive to patch and patch edge, making a circle on fabric with soft bristle
Lift patch. Apply adhesive to area of fabric inside adhesive circle.
Allow adhesive to dry until tacky (about 10 minutes).
Press cement surfaces together firmly with roller while tacky.
Seal by wiping edge of patch with soft bristle brush.
Install or repair webbing using machine stitching in a square pattern with diagonal stitches from corner to corner.
10. Repair hardware as shown in the following figure. See FM 10-16 for installation of eyelets and studs with washers.